Description
x
Core Return Policy!
The XDP Fuel System Contamination Kit - No Pump (Stock Replacement) XD613 will help you get back up and running in your 2017-2019 Ford 6.7L Powerstroke. The CP4 injection pump in the Super Duty trucks is known as a common failure point in the fuel system and often fails in a devastating manner.
As a result, fragments from a CP4 failure contaminate the fuel injector lines, fuel rails, fuel injectors, and many other lines and hoses throughout the entire fuel system. To correct the contaminated system and avoid the risk of contaminating the replacement parts, all the components mentioned must then be replaced.
Trying to wash out the fuel system doesn't ensure that all the remaining metal fragments or debris will be removed from the system. The XDP OER Series Fuel Contamination Kit is excellent for repairing your Powerstroke engine with a failed CP4 fuel injection pump, DEF contamination, or water in the fuel tank.
This XDP OER Series Fuel Contamination Kit comes with all the major parts you need to get your truck back up and running but allows you to choose your own high pressure pump such as the S&S Diesel 6.7F-DCP CP4 To DCR Conversion. Additional components included with this kit are fuel injectors, fuel injector lines, fuel rails, and many more parts.
Swapping out all these components will help ensure that all the injection pump debris is out of the fuel system. This will make sure that the replacement parts won't get contaminated from the previous pump failure.
Features
- (1) Fuel Return Line
- (8) Fuel Injector Lines
- (1) CP4 Pump Installation Kit
- (8) Fuel Injector Hold Down Bolts
- (2) Genuine Bosch Fuel Rails With Sensors
- (8) Genuine Bosch Remanufactured Fuel Injectors
Applications:
- 2017-2019 Ford F-250 Super Duty (6.7L Powerstroke)
- 2017-2019 Ford F-350 Super Duty (6.7L Powerstroke)
- 2017-2019 Ford F-450 Super Duty (6.7L Powerstroke)
- 2017-2019 Ford F-550 Super Duty (6.7L Powerstroke)
Shipping & Return
xReturns Policy
If you would like to return or refund an item please use the contact page on our website and write us a message. You can also email us at info@classictomodernparts.com or phone 860-810-4654. Customer pays return shipping. All returns must include all items from your purchase or a possible restocking fee may apply. If possible please put them in the same box that arrived to you. Some circumstances in which credit will not be issued but not limited to: Product has been installed and/or used, product has been damaged from an attempt to be installed and/or used, product is shipped back without original box, product serial number does not match that of which was original shipped to buyer, product is deemed not re-saleable by Classic To Modern Parts due to customers own actions in dealing with the product.- Choosing a selection results in a full page refresh.