Customer Service/Inquiries
(959) 256-8352
Primary Sales
(959) 256-8353
Description
x
The Valair Street Dual Disc Clutch NMU70G56DDSN-ORG for your 2005.5-2018 Dodge 5.9L/6.7L Diesel offers more holding power and a wider range of use over a single disc clutch, while retaining similar driving characteristics. With a 3800lb diaphragm style pressure plate quick shifts are still possible while pedal pressure will be just over stock.
Organic:
The Organic Street Dual Disc is ideal for trucks from stock to 550HP that tow heavy on a regular basis. Clutch engagement will be very close to stock feel. (Not recommended for Racing)
FEATURES:
- Dual Disc Kit - up to 550HP
- Organic Facings
- Nodular Iron Flywheel and Billet Floater plate
- Pressure Plate Load - 3800#
- Not for competition use
Kit Includes:
New Nodular Sprung hub G56 Dual Disc Flywheel, 3800# Pressure Plate, Organic Clutch Discs, Release Bearing, HD Pilot Bearing, Modified Clutch Fork, Bolt Kit, and Alignment Tool & HD Hydraulic Kit NMU70HYD-03
G56 Gear rollover facts:
When converting a G56 transmission over to a solid mass flywheel vs. dual mass flywheel, gear rollover is inevitable. Gear rollover noise is often heard when the vehicle is idling or under a load in low RPM ranges (often referred to as sounding like marbles in the transmission). This is completely normal.
Gear Rollover Noise:
Gear rollover noise is caused by reverse engine spike and can in most cases be drastically reduced by simply changing the oil in the transmission or reducing engine spike produced by inadequate engine components (ex. misfiring injector, FCA problems, Electronic programming). The oil recommended by the transmission manufacture Mercedes-Benz is Mobil Delvac Synthetic Transmission Fluid 50. We at Valair Inc. recommend draining completely and refilling with 7 quarts. Only 6 quarts will fit when utilizing the fill hole, the final quart will need to be filled through the shift tower.
Disengagement Noise:
On all dual and triple disc clutches, a noise will be associated with the disengagement of the clutch. This is due to the intermediate plate(s) floating freely in the lugs of the flywheel. This is NOT a bad throw out bearing!!! The noise can possibly get more noticeable during the break-in period of the clutch due to the intermediate plate(s) seating in.
WARRANTY INFO:
1 Year / 12,000 Mile
Shipping & Return
xReturns Policy
If you would like to return or refund an item please use the contact page on our website and write us a message. You can also email us at info@classictomodernparts.com or phone 860-810-4654. Customer pays return shipping. All returns must include all items from your purchase or a possible restocking fee may apply. If possible please put them in the same box that arrived to you. Some circumstances in which credit will not be issued but not limited to: Product has been installed and/or used, product has been damaged from an attempt to be installed and/or used, product is shipped back without original box, product serial number does not match that of which was original shipped to buyer, product is deemed not re-saleable by Classic To Modern Parts due to customers own actions in dealing with the product.- Choosing a selection results in a full page refresh.